Your location >index > Products > RD30 series

RD30 series
| Model(Analog) | HW-MN1200-RD30 | HW-MN800-RD30 | HW-MN540-RD30 |
| Image Sensor | 1/4" | 1/2.8" | 1/3" |
| SONY CMOS IMX138 | MT9V139 | CCD | |
| Signal System | PAL/NTSC | ||
| Effective Pixels | PAL:1280(H) X 1024 (V) | PAL:1020H×596V (610k) | PAL:976(H)×582(V) |
| PAL:1280(H) X 1024 (V) | NTSC:1020H×508V (520k) | NTSC:1020H×508(V) | |
| Horizontal Resolution | 1200TVL | 800TVL | 540TVL |
| Day & Night | IR cut filter with auto switch | Auto (Electrical ) | |
| Lens Mount | M12 | ||
| Lens | 1.4mm | ||
| The horizontal angle | 178° | ||
| Top down Perspective | 360° | ||
| Min. Illumination | 0.1Lux@(F1.2,AGC ON) | 0.1Lux@(F1.2,AGC ON) | 0.001LUX/F1.2 |
| S/N Ratio | >46dB | >48dB | >60dB |
| Shutter Time | 1/50-1/60,000S(PAL),1/60-1/60,000S(NTSC) | ||
| White Balance | ATW | ||
| AGC | Auto | ||
| Synchronization | Internal Synchronization | ||
| Video Output | 1.0Vp-p,75Ω | ||
| IR lamp | 3 units | ||
| IR Effective Distance | Up to 25 meters | ||
| Infrared lamp operating current | 385mA | ||
| current of the CCD circuit board | 60mA |
50mA | 50mA |
| Power Supply | DC12V | ||
| Overvoltage protection | TVS | ||
| Video port protection | 5KV | ||
| IP Rating | IP65 | ||
| Operating Conditions | -20℃~60℃ / 10% ~ 95%RH | ||
| Dimension(mm) | 144D×60H | ||
| Weight | 700g | ||
| Model(Network) | HW-WL1080-RD30 | HW-WL960-RD30 | HW-WL720-RD30 |
| Image Sensor | 1/2.8" | 1/2.8" | 1/3" |
| CMOS | |||
| Effective Pixels | 1920x1080 | 1280x960 | 1280x720 |
| Day & Night | IR cut filter with auto switch | ||
| Lens Mount | M12 | ||
| Lens | 1.4mm | ||
| Wide Dynamic Range | Digital WDR | ||
| Video Compression | H.264/M-JPEG | ||
| H.264 Compression Profile | Main profile | ||
| Bit Rate | 32 Kbps~16Mbps | ||
| Dual Stream | Yes | ||
| Frame Rate | 30fps | ||
| The horizontal angle | 178° | ||
| Top down Perspective | 360° | ||
| System Compatibility | ONVIF, PSIA, CGI | ||
| Communication Interface | 1 RJ45 10 M/100 M Ethernet port | ||
| Power Supply | 12 V DC ± 10%; PoE (802.3af) | ||
| Power Consumption | Max. 5.5W (7.5W with ICR on) | ||
| Ingress protection | IP65 | ||