Your location >index > Products > HW-Cube2 ALARM Cameras
HW-Cube 2 ALARM Camera
Model | IPC Cube 2 | |
Camera | Image Sensor | 1/3" Progressive Scan CMOS |
Minimum Illumination | 0.19 lux@ F2.0, AGC on | |
0 lux with IR | ||
Shutter Time | 1/30s ~ 1/100,000s | |
Lens | 3.6mm@F2.0, angle of view: 76.1° | |
(2.8mm optional) | ||
Lens Mount | M12 | |
Day& Night | ICR | |
Digital Noise Reduction | 3D DNR | |
Wide Dynamic Range | Digital WDR | |
Backlight Compensation | Yes, zone configurable | |
Compression Standard | Video Compression | H.264 |
H.264 Compression Profile | Main profile | |
Bit Rate | 32 Kbps~16Mbps | |
Image | Max Image Resolution | 1280x720 |
Frame Rate | 30fps (1280 x 720) | |
Image Settings | Saturation, brightness, contrast adjustable through client software or web browser | |
Network | Network Storage | NAS |
Alarm Trigger | Motion detection, tampering alarm, network disconnect, IP address conflict, storage full, storage error | |
Protocols | TCP/IP, HTTP, DHCP, DNS, DDNS, RTP, RTSP, PPPoE, SMTP, NTP, UPnP, ICMP,IGMP,SNMP, FTP, 802.1X, QoS, HTTPS | |
System Compatibility | ONVIF, PSIA, CGI | |
General Functionalities (Security) | Flickerless, heartbeat, mirror, user authentication, video mask, watermark | |
Interface | Communication Interface | 1 RJ45 10 M/100 M Ethernet port (option) |
On-board Storage | Built-in Micro SD/SDHC/SDXC card slot, up to 64 GB | |
General | Power Supply | 12 V DC ± 10%; PoE (802.3af) |
Power Consumption | Max. 5w | |
Working Temperature (Operating Conditions) | -30 °C ~ 60 °C (-22 °F ~ 140 °F), humidity 95% or less (non-condensing) | |
Impact Protection | IEC60068-275Eh, 50J; EN50102, exceeding IK10 | |
IR Range | up to 10m | |
Dimensions | 112L× 97.5W × 46.5H mm | |
Weight | 250g (0.55 lbs) | |
Ingress protection | IP65 |