Your location >index > Products > HW-Cube1 Cameras

 

 

HW-Cube 1

Key Features

  • Sent Mobile SSID to CUBE1,Mobile can control.
  • Up to 1.0 megapixel (720 x 960) resolution
  • HD real-time video
  • PIR detection
  • IR LEDs (up to 10m)
  • DWDR & 3D DNR & BLC
  • Built-in microphone & speaker
  • SD/SDHC/SDXC card slot (up to 64GB)
  • Wi-Fi optional (WPS connection)

Specifications

Model HW Cube 1
Camera Image Sensor 1/3" Progressive Scan CMOS
Minimum Illumination 0.19 lux@ F2.0, AGC on
0 lux with IR
Shutter Time 1/30s ~ 1/100,000s
Lens 2.4mm@F2.0, angle of view: 113.1°
(4mm optional)
Lens Mount M12
Day& Night ICR
Digital Noise Reduction 3D DNR
Wide Dynamic Range Digital WDR
Backlight Compensation Yes, zone configurable
Compression Standard Video Compression H.264/M-JPEG
H.264 Compression Profile Main profile
Bit Rate 32 Kbps~16Mbps
Image Max Image Resolution 720x960
Frame Rate 30fps (720 x 960)
Image Settings Saturation, brightness, contrast adjustable through client software or web browser
Network Network Storage NAS
Alarm Trigger Motion detection, tampering alarm, network disconnect, IP address conflict, storage full, storage error
Protocols TCP/IP, HTTP, DHCP, DNS, DDNS, RTP, RTSP, PPPoE, SMTP, NTP, UPnP, ICMP,IGMP,SNMP, FTP, 802.1X, QoS, HTTPS
System Compatibility ONVIF, PSIA, CGI
General Functionalities (Security) Flickerless, heartbeat, mirror, user authentication, video mask, watermark
Interface Communication Interface 1 RJ45 10 M/100 M Ethernet port
On-board Storage Built-in Micro SD/SDHC/SDXC card slot, up to 64 GB
General Power Supply 5 V DC ± 10%; PoE (802.3af)
Power Consumption Max. 5w
Working Temperature (Operating Conditions) -30 °C ~ 60 °C (-22 °F ~ 140 °F), humidity 95% or less (non-condensing)
Impact Protection IEC60068-275Eh, 50J; EN50102, exceeding IK10
IR Range up to 10m
Dimensions 112L× 97.5W × 46.5H mm
Weight 250g (0.55 lbs)
Ingress protection IP65